| |
Radial Seals
Cantilever Spring
The AccuSeal Cantilever or "V" spring
is machined from flat strip stock and
formed into its final shape. A good
general-purpose spring, the cantilever
spring can be used in most
reciprocating applications and also in
slow to moderate rotary service. The
"V" shaped spring design provides a
point contact for positive sealing along
both the inside and outside diameters
of the seal. A "V" spring together with a
scraper lip is especially effective in
applications with viscous fluid media.
Available in all sizes to fit both standard
industrial and military glands. The
cantilever spring is also available with a
FDA approved grade of RTV silicone
for food and drug applications.
|
 |
 |
|
Standard Lip
Standard Heel
|
Standard I.D. Lip
Standard Heel
|
 |
 |
|
Scraper O.D. Lip
Standard Heel
|
Scraper I.D. & O.D. Lip
Standard Heel
|
 |
 |
|
Standard Lip
Extended Heel
|
Scraper I.D. Lip
Extended Heel
|
 |
 |
|
Scraper O.D. Lip
Extended Heel
|
Scraper I.D. & O.D. Lip
Extended Heel
|
|
|
Offset - Coil Spring
The AccuSeal Offset-Coil Spring is
utilized where friction requirements
need to be closely controlled. As the
seal jacket wears, the force due to the
spring remains constant allowing for a
consistent friction force throughout the
life of the seal. The offset Coil Spring is
a good choice for greater shaft run-outs
or wider hardware tolerances. This
spring can handle side loading without
taking a compression set, even during
installation into stepped or closed
glands. Available in all sizes to fit both
standard industrial and military glands.
|
 |
 |
|
Standard Lip
Standard Heel
|
Standard I.D. Lip
Standard Heel
|
 |
 |
|
Scraper O.D. Lip
Standard Heel
|
Scraper I.D. & O.D. Lip
Standard Heel
|
 |
 |
|
Standard Lip
Extended Heel
|
Scraper I.D. Lip
Extended Heel
|
 |
|
|
Scraper O.D. Lip
Extended Heel
|
Scraper I.D. & O.D. Lip
Extended Heel
|
|
|
Helical Spring
The AccuSeal Helical Wound Spring is
designed for applications where a high
unit load and tight sealing are the
primary concerns. Most effective for
static service, the Helical spring can also
be used in slow dynamic systems. This
spring is not recommended for dynamic
applications where seal life and wear
are critical aspects. A small amount of
seal jacket wear dramatically reduces
the force due to the spring and
consequently the overall sealability.
Available in all sizes to fit both standard
industrial and military glands.
|
 |
 |
|
Standard Lip
Standard Heel
|
Standard I.D. Lip
Standard Heel
|
 |
 |
|
Scraper O.D. Lip
Standard Heel
|
Scraper I.D. & O.D. Lip
Standard Heel
|
 |
 |
|
Standard Lip
Extended Heel
|
Scraper I.D. Lip
Extended Heel
|
 |
 |
|
Scraper O.D. Lip
Extended Heel
|
Scraper I.D. & O.D. Lip
Extended Heel
|
|
